Mini Mermaid *Pattern*

Around a year ago, I made a hand-sized mermaid pattern on Instructables (which I’ve linked to previously and can be found here: http://www.instructables.com/id/The-Little-Crochet-Mermaid/ ). This is similar to that one, with a few obvious changes. One being the head-shape and another being the size. This mini mermaid is smaller (only 3.5in [8.89cm] long with the guage I used). I, personally, think that the proportions of this new pattern are much cuter.

-Mini Mermaid-

Supplies (information in parenthesis is what I used):
-Yarn (Järbo Garn Nova)
-Crochet hook to gauge with your yarn (D/3-3.25MM)
-Safety eyes
-Stuffing
– Yarn needle
-Scissors

Abbreviations:
R – Round
Ch – Chain
Sc – Single crochet
Sl st – Slip stitch
St – Stitch
Make the following pieces…

Head (make 1):
Make a magic ring.
R1 – 6sc inside the magic ring. (6)
R2 – 2sc in each of the next 6 sts. (12)
R3 – [1sc in the next st, 2sc in the next st]*6 times around. (18)
R4 – R6 – 1sc in each of the next 18 sts. (18)
Here is the point where, if you’re using safety eyes, you should insert them while the opening is still big enough. You can also secure the tail of your magic ring on the inside now.
R7 – [1sc in the next st, sc the next 2 sts together]*6 times. (12)
R8 – [Sc the next two sts together]*6 times around. (6)
Now you can stuff the head. I use the handle of one of my bigger hooks to help push the stuffing through the hole. If you’re having a hard time stuffing, take out a few stitches until the opening is big enough for you to stuff. Redo the stitches when you’re done.
Sew the opening closed and finish off the tail.

Arms (make 2):
Make a magic ring.
R1 – 3sc inside the magic ring. (3)
R 2 & R3 – 1sc in the next 3 sts. (3)
Finish, leaving a long tail.

Fins (make 2):
R1 – Ch 4. Turn. (4)
R2 – 1sc in the second ch from hook. 1sc in each of the next 2 sts. Ch 1 and turn. (3)
R3 – 1sc in the first st. Sc the next 2 sts together. Ch 1 and turn. (2)
R4 – Sc the next two sts together. (1)
Finish, leaving a long tail.

Bra (make 2) (optional):
Make a magic ring.
3sc inside the magic ring. (3)
Finish, leaving a long tail.

Torso (make 1):
Make a magic ring.
R1 – 6sc inside the magic ring. (6)
R2 – 2sc in each of the next 6 sts. (12)
R3 – R5 – 1sc in each of the next 12 sts. (12)
Finish off.

Tail (make 1):
Make a magic ring.
R1 – 3sc inside the magic ring. (3)
R2 – 2sc in each of the next 3 sts. (6)
R3 – 1sc in each of the next 6sts. (6)
R4 – [1sc in the next st, 2sc in the next st]*3 times around. (9)
R5 – 1sc in each of the next 9 sts.
R6 – [1sc in each of the next 2 sts, 2sc in the next st]*3 times around. (12)
R7 – 1sc in each of the next 12 sts. Ch. 1 (12)
With the ch still on your hook, take the torso piece and hold the opening end up against the opening of the tail. While the tail is facing you, sc through the front loops of both pieces all the way around. Before reaching the end, stuff the pieces. Sl st into the first sc of the round and finish off the tail. If you want to use different colors for the main piece of the tail and this border, just finish off the tail after R7 and continue with a new color.

Assembly:
Using the tail at the bottom of the head, attach the head to the top of the torso/tail piece.
With the face forward, sew the arms to each side of the top half of the torso.
Sew the fins to each side of the bottom of the tail. The widest, flattest edge should be sewn against the tail (the side where both yarn tails are coming out from).
Sew each bra piece to the chest and stitch a line around the torso to act as a bra strap.

Cut strands of yarn that are twice the length of the mermaid’s body.
Option 1: Fold a strand in half and, using your crochet hook, pull the folded middle portion under a stitch on the head. You should now have a loop on one side of the stitch and two strands sticking out of the other side. Pull the two strands over through the loop and tug tight. Here is a representation of how that looks from the old pattern:

Option 2: I’ve found that I tend to pull out a bit of stuffing whenever I use my crochet hook in making hair. A second way to do this with less stuffing loss is to use a yarn needle. Thread your strand of yarn through the yarn needle and pull it under a stitch as before. Only pull it about three fourths of the way through, but not all the way. With some of the yarn still sticking out of the other side, pull the needle back under the same stitch until you have two strands on one side and a loop on the other. Pull the strands over through the loop and tug tight.

After you’ve finished attaching all of the hair you can leave it as is or you can take the time to split each strand of yarn for finer hair (I prefer this look).

Done!

Mini Elephant *Pattern*

-Mini Elephant-

Supplies (information in parenthesis is what I used):
-Yarn (Järbo Garn Nova)
-Crochet hook to gauge with your yarn (D/3-3.25MM)
-Safety eyes
-Stuffing
– Yarn needle
-Scissors

Abbreviations:
R – Round
Ch – Chain
Sc – Single crochet
Sl st – Slip stitch
St – Stitch
Make the following pieces…

Head (make 1):
Make a magic ring.
R1 – 6sc inside the magic ring. (6)
R2 – 2sc in each of the next 6 sts. (12)
R3 – [1sc in the next st, 2sc in the next st]*6 times around. (18)
R4 – R6 – 1sc in each of the next 18 sts. (18)
Here is the point where, if you’re using safety eyes, you should insert them while the opening is still big enough. You can also secure the tail of your magic ring on the inside now.
R7 – [1sc in the next st, sc the next 2 sts together]*6 times. (12)
R8 – [Sc the next two sts together]*6 times around. (6)
Now you can stuff the head. I use the handle of one of my bigger hooks to help push the stuffing through the hole. If you’re having a hard time stuffing, take out a few stitches until the opening is big enough for you to stuff. Redo the stitches when you’re done.
Sew the opening closed and finish off the tail.

Legs (make 4):
Make a magic ring.
R1 – 3sc inside the magic ring. (3)
R2 – 1sc in the next 3 sts. (3)
Finish, leaving a long tail.

Body (make 1):
Make a magic ring.
R1 – 6sc inside the magic ring. (6)
R2 – 2sc in each of the next 6 sts. (12)
R3 – R5 – 1sc in each of the next 12 sts. (12)
R8 – [Sc the next two sts together]*6 times around. (6)
Stuff and leave a long tail.

Ears (make 2)
Make a magic ring.
R1 – 4sc inside the magic ring. Ch 1 and turn. (4)
R2 – 2sc in each of the next 4 sts. Ch1 and turn. (8)
R3 – [1sc in the next st, 2sc in the next st]*4 times. (12)
Finish, leaving a long tail.

Trunk (make 1)
Make a magic ring with enough extra yarn for sewing later.
R1– 3sc inside the magic ring. (3)
R2R6 1sc in the next 3sts. (3)
Finish, leaving a long tail.

Assembly:
Using the long tail left on the body, sew the head to the body.
Sew each leg to the sides of the body. Make sure the face is in the right direction.
With the magic ring tail, sew one end of the trunk to the bottom half of the face, between the eyes. With the tail on the other end of the trunk, sew the trunk to the top half of the face, between the eyes.
Sew the ears to the sides of the head with the curved edge pointing outwards.
Finish off any leftover tails.

Done!

Mini Turtle *Pattern*

-Mini Turtle-

Supplies (information in parenthesis is what I used):
-Yarn for head/legs (Approx. 300in [762cm] of Järbo Garn Nova)
-Yarn for shell front (Approx. 100in [254cm] of Järbo Garn Nova)
-Yarn for shell back (Approx. 100in [254cm] of Järbo Garn Nova)
-Black yarn for detail (Järbo 8/4)
-Crochet hook to gauge with your yarn (D/3-3.25MM)
-Safety eyes
-Stuffing
– Yarn needle
-Scissors

Abbreviations:
R – Round
Ch – Chain
Sc – Single crochet
Sl st – Slip stitch
St – Stitch
Make the following pieces…

Head (make 1):
Using your chosen head/leg color, make a magic ring.
R1 – 6sc inside the magic ring. (6)
R2 – 2sc in each of the next 6 sts. (12)
R3 – [1sc in the next st, 2sc in the next st]*6 times. (18)
R4 – R6 – 1sc in each of the next 18 sts. (18)
Here is the point where, if you’re using safety eyes, you should insert them while the opening is still big enough. You can also secure the tail of your magic ring on the inside now.
R7 – [1sc in the next st, sc the next 2 sts together]*6 times around. (12)
R8 – [Sc the next 2 sts together]*6 times around. (6)
Now you can stuff the head. I use the handle of one of my bigger hooks to help push the stuffing through the hole. If you’re having a hard time stuffing, take out a few stitches until the opening is big enough for you to stuff. Redo the stitches when you’re done.
Sew the opening closed and leave a long tail.

Legs (make 4):
Using your chosen head/leg color, make a magic ring.
R1 – 3sc inside the magic ring. (3)
R2 – 1sc in the next 3 sts. (3)
Finish, leaving a long tail.

Shell Front (make 1):
Using your chosen shell front color, make a magic ring.
R1 – 6sc inside the magic ring. (6)
R2 – 2sc in each of the next 6 sts. (12)
R3 & R4 – 1sc in each of the next 12 sts. (12)
Finish off the tail.

Shell Back (make 1):
Using your chosen shell back color, make a magic ring.
R1 – 6sc inside the magic ring. (6)
R2 – 2sc in each of the next 6 sts. (12)
R3 & R4 – 1sc in each of the next 12 sts. (12)
Do not cut the yarn. Sl st in the next st and ch 1.
Take the shell front piece and place it against the shell back with the right sides on the outside and the shell back facing you. Using the inside loops, sc around through both pieces.
Pause before you’ve gotten all the way around so that you can stuff the shell. End with a sl st to the first sc of the round and finish off the tail.

Assembly:

Using the long tail left on the head, sew the head to the shell on top of the seam between the two shell pieces. The shell front should be facing the same side of the head where you have the eyes placed. Finish off any extra tail length.

Sew each of the legs to the sides of the shell front piece. Do not sew them over the edge of the shell back piece. Finish off any tails.

You can leave it as is, or you can use a little bit of black yarn to embroider on a mouth.

Done!

Heart Patch Puppy *Pattern*

 

-Heart Patch Puppy-

Supplies (information in parentheses is what was used for the example pictures):
– Main color yarn (less than 2 skeins Mark & Kattens Nissegarn, color: 1289)
– Secondary color yarn (less than 1 skein Järbo Garn Nova, color: 48001)
– Black yarn ( Järbo 8/4)
– Crochet hook to gauge with your yarn ( D/3-3.25MM)
– Pins
– Yarn needle
– Scissors
– Stuffing
– Buttons or anything else you want to use for eyes
The puppy in this pattern (using the specific yarn mentioned above) came out to be 8.5 in (21.6cm) tall.

Abbreviations:
R – Round/Row
Ch – Chain
Sc – Single crochet
Hdc – Half-double crochet
Dc – Double crochet
Sl st – Slip stitch
St – Stitch

Make the following pieces…

Head (make 1):
Using your main color, make a magic ring.
R1 – 6sc inside the magic ring. (6)
R2 – 2sc in each of the next 6 sts. (12)
R3 – [1sc in the next st, 2sc in the next st]*6 times. (18)
R4 – [1sc in each of the next 2 sts, 2sc in the next st]*6 times. (24)
R5 – [1sc in each of the next 3 sts, 2sc in the next st]*6 times. (30)
R6 – [1sc in each of the next 4 sts, 2sc in the next st]*6 times. (36)
R7 – [1sc in each of the next 5 sts, 2sc in the next st]*6 times. (42)
R8 – [1sc in each of the next 6 sts, 2sc in the next st]*6 times. (48)
R9 – [1sc in each of the next 7 sts, 2sc in the next st]*6 times. (54)
R10 – [1sc in each of the next 8 sts, 2sc in the next st]*6 times. (60)
R11 – R20 – 1sc in each of the next 60 sts. (60)
R21 – [1sc in each of the next 9 sts, 2sc in the next st]*6 times. (66)
R22 – R25 – 1sc in each of the next 66 sts. (66)
R26 – [1sc in each of the next 9 sts, sc the next 2 sts together]*6 times. (60)
R27 – [1sc in each of the next 8 sts, sc the next 2 sts together]*6 times. (54)
R28 – [1sc in each of the next 7 sts, sc the next 2 sts together]*6 times. (48)
R29 – [1sc in each of the next 6 sts, sc the next 2 sts together]*6 times. (42)
R30 – [1sc in each of the next 5 sts, sc the next 2 sts together]*6 times. (36)
R31 – [1sc in each of the next 4 sts, sc the next 2 sts together]*6 times. (30)
R32 – [1sc in each of the next 3 sts, sc the next 2 sts together]*6 times. (24)
R33 – [1sc in each of the next 2 sts, sc the next 2 sts together]*6 times. (18)
R34 – [1sc in each of the next 1 sts, sc the next 2 sts together]*6 times. (12)
Stuff the head while the hole is still big enough.
R35 – 2sc in each of the next 12 sts. (6)
Sew closed and finish off the tail.

Muzzle (make 1):
Using your secondary color, make a magic ring.
R1 – 6sc inside the magic ring. (6)
R2 – [3sc in the next st, 1sc in each of the next 2 sts]*2 times (10)
R3 – [2sc in each of the next 3 sts, 1 sc in each of the next 2 sts]*2 times (16)
R4 – [1sc in the next st, 2sc in the next st]*3 times. 1sc in each of the next 2 sts. [1sc in the next st, 2sc in the next st]*3 times. 1sc in each of the next 2 sts. (22)
R5 – [1sc in each of the next 2 sts, 2sc in the next st]*3 times. 1sc in each of the next 2 sts. [1sc in each of the next 2 sts, 2sc in the next st]*3 times. 1sc in each of the next 2 sts. (28)
R6 – [1sc in each of the next 3 sts, 2sc in the next st]*3 times. 1sc in each of the next 2 sts. [1sc in each of the next 3 sts, 2sc in the next st]*3 times. 1sc in each of the next 2 sts. (34)
R7 – R10 – 1sc in each of the next 34 sts. (34)
Finish, leaving a long tail.

Nose (make 1):
Using black, make a magic ring.
R1 – 6sc inside the magic ring. (6)
R2 – [1sc in the next st, 3sc in the next st]*3 times. (12)
R3 – [1sc in each of the next 3 sts, 3sc in the next st]*3 times. (18)
Finish, leaving a long tail.

Heart (make 1):
Using your secondary color, make a magic ring.
R1 – Slst and ch 2 inside magic ring (counts as first dc). 9dc inside magic ring. Do not join. Ch 1. (10)
R2 – 3sc onto the side of the dc that is attached to your ch 1. 1sc in magic ring between the first and last dc of the previous round. Work 3sc up the side of the first dc of the previous round. 2sc in the top of the first dc. 2sc in the next st. 1sc in each of the next 2 sts. (1sc, 1hdc, 1sc)*in the next st. 1sc in each of the next 2 sts. 2sc in the next st. 2sc in the next st. Join to the first sc of this round. (22)
Finish, leaving a long tail.

Ear (make 2):
Using either color, make a magic ring.
R1 – 6sc inside the magic ring. (6)
R2 – 2sc in each of the next 6 sts. (12)
R3 – [1sc in the next st, 2sc in the next st]*6 times. (18)
R4 – [1sc in each of the next 2 sts, 2sc in the next st]*6 times. (24)
R5 – [1sc in each of the next 3 sts, 2sc in the next st]*6 times. (30)
R6 – R10 – 1sc in the next 30 sts. (30)
R11 – [1sc in each of the next 3 sts, sc the next 2 sts together]*6 times. (24)
R12 – R16 – 1sc in the next 24 sts. (24)
R17 – [1sc in each of the next 2 sts, sc the next 2 sts together]*6 times. (18)
R18 – R22 – 1sc in the next 18 sts. (18)
Finish, leaving a long tail.

Body (make 1):
Using your main color, make a magic ring.
R1 – 6sc inside the magic ring. (6)
R2 – 2sc in each of the next 6 sts. (12)
R3 – [1sc in the next st, 2sc in the next st]*6 times. (18)
R4 – [1sc in each of the next 2 sts, 2sc in the next st]*6 times. (24)
R5 – [1sc in each of the next 3 sts, 2sc in the next st]*6 times. (30)
R6 – [1sc in each of the next 4 sts, 2sc in the next st]*6 times. (36)
R7 – [1sc in each of the next 5 sts, 2sc in the next st]*6 times. (42)
R8 – [1sc in each of the next 6 sts, 2sc in the next st]*6 times. (48)
R9 – [1sc in each of the next 7 sts, 2sc in the next st]*6 times. (54)
R10 – [1sc in each of the next 8 sts, 2sc in the next st]*6 times. (60)
R11 – [1sc in each of the next 9 sts, 2sc in the next st]*6 times. (66)
R12 R21 – 1sc in each of the next 66 sts. (66)
R22 – [1sc in each of the next 9 sts, sc the next 2 sts together]*6 times. (60)
R23 – 1sc in each of the next 60 sts. (60)
R24 – [1sc in each of the next 8 sts, sc the next 2 sts together]*6 times. (54)
R25 – 1sc in each of the next 54 sts. (54)
R26 – [1sc in each of the next 7 sts, sc the next 2 sts together]*6 times. (48)
R27 – 1sc in each of the next 48 sts. (48)
R28 – [1sc in each of the next 6 sts, sc the next 2 sts together]*6 times. (42)
R29 – 1sc in each of the next 42 sts. (42)
R30 – [1sc in each of the next 5 sts, sc the next 2 sts together]*6 times. (36)
R31 – 1sc in each of the next 36 sts. (36)
R32 – [1sc in each of the next 4 sts, sc the next 2 sts together]*6 times. (30)
R33 – 1sc in each of the next 30 sts. (30)
Finish, leaving a long tail.

Right Leg (make 1):
Using your main color, make a magic ring.
R1 – 6sc inside the magic ring. (6)
R2 – 2sc in each of the next 6 sts. (12)
R3 – [1sc in the next st, 2sc in the next st]*6 times. (18)
R4 – [1sc in each of the next 2 sts, 2sc in the next st]*6 times. (24)
R5 – [1sc in each of the next 3 sts, 2sc in the next st]*6 times. (30)
R6 – [1sc in each of the next 4 sts, 2sc in the next st]*6 times. (36)
R7 – [1sc in each of the next 5 sts, 2sc in the next st]*6 times. (42)
Work only in the back stitches for R8 only.
R8 – R10 – 1sc in each of the next 42 sts. (42)
R11 – [1sc in each of the next 5 sts, sc the next 2 sts together]*3 times. 1sc in each of the next 21 sts. (39)
R12 – [1sc in each of the next 4 sts, sc the next 2 sts together]*3 times. 1sc in each of the next 21 sts. (36)
R13 – [1sc in each of the next 3 sts, sc the next 2 sts together]*3 times. 1sc in each of the next 21 sts. (33)
R14 – [1sc in each of the next 2 sts, sc the next 2 sts together]*3 times. 1sc in each of the next 21 sts. (30)
R15 – 1sc in each of the next 30 sts.
R16 – 1sc in each of the next 26 sts. Sc the next 2 sts together. Ch 1 and turn. (27)
R17 – Sc the next 2 sts together. 1sc in each of the next 23 sts. Sc the next 2 sts together. Ch 1 and turn. (25)
R18 – Sc the next 2 sts together. 1sc in each of the next 21 sts. Sc the next 2 sts together. Ch 1 and turn. (23)
R19 – Sc the next 2 sts together. 1sc in each of the next 19 sts. Sc the next 2 sts together. Ch 1 and turn. (21)
R20 – Sc the next 2 sts together. 1sc in each of the next 17 sts. Sc the next 2 sts together. Ch 1 and turn. (19)
R21 – Sc the next 2 sts together. 1sc in each of the next 15 sts. Sc the next 2 sts together. Ch 1 and turn. (17)
R22 – Sc the next 2 sts together. 1sc in each of the next 13 sts. Sc the next 2 sts together. Ch 1 and turn. (15)
R23 – Sc the next 2 sts together. 1sc in each of the next 11 sts. Sc the next 2 sts together. Ch 1 and turn. (13)
R24 – Sc the next 2 sts together. 1sc in each of the next 9 sts. Sc the next 2 sts together. Ch 1 and turn. (11)
R25 – Sc the next 2 sts together. 1sc in each of the next 7 sts. Sc the next 2 sts together. Ch 1 and turn. (9)
R26 – Sc the next 2 sts together. 1sc in each of the next 5 sts. Sc the next 2 sts together. Ch 1 and turn. (7)
R27 – Sc the next 2 sts together. 1sc in each of the next 3 sts. Sc the next 2 sts together. Ch1 and turn. (5)
R28 – Sc the next 2 sts together. 1sc in the next st. Sc the next 2 sts together. (3)
Finish, leaving a long tail.

Left Leg (make 1):
Using your main color, make a magic ring.
Work R1 – R15 of the Right Leg.
R16 – 1sc in each of the next 10 sts. Sc the next 2 sts together. Ch 1 and turn. (12)
R17 – Sc the next 2 sts together. 1sc in each of the next 23 sts. Sc the next 2 sts together. Ch1 and turn. (25)
Work R18 – R28 the same as the Right Leg.
Finish, leaving a long tail.

Right Arm (make 1):
Using your main color, make a magic ring.
R1 – 6sc inside the magic ring. (6)
R2 – 2sc in each of the next 6 sts. (12)
R3 – [1sc in the next st, 2sc in the next st]*6 times. (18)
R4 – [1sc in each of the next 2 sts, 2sc in the next st]*6 times. (24)
R5 – [1sc in each of the next 3 sts, 2sc in the next st]*6 times. (30)
R6 – R8 – 1sc in each of the next 30 sts. (30)
R9 – [1sc in each of the next 3 sts, sc the next 2 sts together]*3 times. 1sc in each of the next 15 sts. 27)
R10 – [1sc in each of the next 2 sts, sc the next 2 sts together]*3 times. 1sc in each of the next 15 sts. (24)
R11 – [1sc in the next st, sc the next 2 sts together]*3 times. 1sc in each of the next 15 sts. (21)
R12 – R16 – 1sc in each of the next 21 sts. (21)
R17 – 1sc in each of the next 8 sts. Sc the next 2 sts together. Ch 1 and turn. (10)
R18 – Sc the next 2 sts together. 1sc in each of the next 14 sts. Sc the next 2 sts together. Ch 1 and turn. (16)
R19 – Sc the next 2 sts together. 1sc in each of the next 12 sts. Sc the next 2 sts together. Ch 1 and turn. (14)
R20 – Sc the next 2 sts together. 1sc in each of the next 10 sts. Sc the next 2 sts together. Ch 1 and turn. (12)
R21 – Sc the next 2 sts together. 1sc in each of the next 8 sts. Sc the next 2 sts together. Ch 1 and turn. (10)
R22 – Sc the next 2 sts together. 1sc in each of the next 6 sts. Sc the next 2 sts together. Ch 1 and turn. (8)
R23 – Sc the next 2 sts together. 1sc in each of the next 4 sts. Sc the next 2 sts together. Ch 1 and turn. (6)
R24 – Sc the next 2 sts together. 1sc in each of the next 2 sts. Sc the next 2 sts together. Ch 1 and turn. (4)
Finish, leaving a long tail.

Left Arm (make 1)
Using your main color, make a magic ring.
Work R1 – R16 of the Right Arm.
R17 – 1sc in each of the next 19 sts. Sc the next 2 sts together. Ch 1 and turn. (20)
R18 – Sc the next 2 sts together. 1sc in each of the next 14 sts. Sc the next 2 sts together. Ch 1 and turn. (16)
Work R19 – R24 the same as the Right Arm.
Finish, leaving a long tail.

Tail (make 1)
Using either color, make a magic ring.
R1 – 3sc inside the magic ring. (3)
R2 – 2sc in each of the next 3 sts. (6)
R3 – [1sc in the next st, 2sc in the next st]*3 times. (9)
R4 – 1sc in each of the next 9 sts. (9)
R5 – [1sc in each of the next 2 sts, 2sc in the next st]*3 times. (12)
R6 – 1sc in each of the next 12 sts. (12)
R7 – [1sc in each of the next 3 sts, 2sc in the next st]*3 times. (15)
R8 – R10 – 1sc in each of the next 15 sts. (15)
R11 – [1sc in each of the next 4 sts, 2sc in the next st]*3 times. (18)
R12 – R17 – 1sc in each of the next 18 sts. (18)
Finish, leaving a long tail.

Foot Pad (make 2):
Using your secondary color, make a magic ring.
R1 – 6sc inside the magic ring. (6)
R2 – 2sc in each of the next 6 sts. (12)
R3 – [1sc in the next st, 2sc in the next st]*6 times. (18)
R4 – [1sc in each of the next 2 sts, 2sc in the next st]*6 times. (24)
Finish, leaving a long tail.

Toe Pad (make 8):
Using your secondary color, make a magic ring.
R1 – 6sc inside the magic ring. Join. (6)
Finish, leaving a long tail.

Assembly:

  • Pin and sew the muzzle to the head as shown, stuffing it before you finish. Pin the nose and the heart in the positions shown and sew on flat. Use the bottom of the head to anchor your button eyes and sew them on as shown.

  • Make sure to sew the ears on in a wide ‘C’ shape with the opening facing front of the face. This helps to give the ears a nice floppy look.

  • Pin the opening of the body piece to the bottom of the head and sew around. Stuff the body before you are finished sewing.

  • Here is an example in the first picture of one stuffed leg and one unstuffed. To help position the legs, allow the long side of the leg opening to run along a round of the body as shown. Pin the legs to the body and take a good look at them to make sure they’re even before you sew. Do the same for the arms. Stuff each piece before finishing.

  • For Round 8 of the legs, you should have worked in the back stitches only. This resulted in a visible ring along the stitches. Position the foot pads and toe pads inside of this ring and sew them on. There should be 1 foot pad and 4 toe pads per foot.

  • Now flip your puppy over and pin/sew the tail on the backside, positioned between the legs.

  •  Using the same color yarn as the arms, stitch on three lines to the ends of the arms and pull them tight to create the appearance of paws.

  • Done!